Contact Adsorption Drying technology

Several features described by engineers from rotary kiln manufacturer of Taida:  
Contact adsorption drying is combined by two types of drying:

鈶爐raditional contact drying, using the heat conduction of the heating solid surface, make water evaporate;

鈶adsorption drying (also called " Dehumidification drying "), affected by the concentration gradient between the material and the adsorbent material, driven to moisture transfer.

There is a very common program of contact adsorption drying is mixing the solid adsorbent with the material which is dried, when the expected mass transfer occurs, separate these two kinds of neurogen; and then, regenerate the solid sorbent to make it return to the process . Clearly, if the adsorbent can easily regeneration and reuse, it can measure the reasonableness of contact adsorption drying from a technical point of view.

This is used to processe feed in the rotary, belt, and box-type tunnel dryer as well as traditional fluidized bed dryer, the dryer can be used to dry the particulate materials of high humidity content.

You are welcome to visit Taida and choose the rotary kiln and other equipments which you are satisfied!