Gypsum-dryer

Gypsum dryer

Brief Introduction of Gypsum dryer:

Intermittent drum Gypsum powder Wok mainly consists of steel machine base, wok, frying pan which has scatter plate, stock guide,riding ring and transmission mechanism.Wok was installed on the furnace,so the furnace body can get the heat directly.Then the heat was passed to gypsum and fry the gypsum in this way.The wok machine use intermittent way to charge or discharge the material and timing frying.This machine is specialized developed for frying β-semi-hydrated gypsum powder and architectural gypsum podwer on the base of the technology of rotary dryer and food wok machine.

Special characteristics of Gypsum dryer:

1.Can make use of the chemical gypsum ( desulfurization gypsum, phospho gypsum, etc..) to fry to β-semi-water gypsum powder directly;
2.Ensure the requirements of burning gypsum powder precise control frying time and temperature in the process.
3.Exit design of wok machine is reasonable, operation without dust pollution;
4.Intermittent feeding and discharging materials can pressure fire and shutdown furnace, when open furnace again, 3 minutes latter, it can be put into normal operation;
5.Equipped gas stove and boiling furnace supply the heating, the exhaust heat can be recycling( boiling water or heated air).

Gypsum dryer Technical Specification:

Model（m)	Processing Capacity（t/h)	input moisture（%）	fuel coal heating value	output moisture（%）
TDHM-100	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-150	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-200	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-300	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-400	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-500	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-600	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-800	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-1000	Contact TAIDA lignite dryer	20-45	≥5500	≤15
TDHM-1200	Contact TAIDA lignite dryer	20-45	≥5500	≤15